Question: What Happens If I Use Thicker Oil?

When should I use 10w40 oil?

Overall the 10W30 will be the more appropriate oil for cold weather and non-performing engines while 10W40 is perfect for warmer temperatures and older vehicles..

Is 20w50 good for high mileage?

Considerations. The viscosity level of engine oil 20W50 is geared toward racing engines, as opposed to high-mileage engines, that run extremely hot and need heavy load operation. … Since its viscosity is so great, it can drag down the functioning of the crankshaft, resulting in less horsepower.

What oil do Nascar engines use?

Mobil 1Custom racing engines need to endure high rpm and operating temperatures, so they require specially formulated, advanced motor oils. It’s a big reason why Mobil 1 is the Official Motor Oil of NASCAR and half of all NASCAR teams use Mobil 1 motor oils for proven performance in the most extreme conditions.

Is it better to use thicker oil?

Using oil that is thicker than recommended may lead to a decrease in fuel economy, a higher load on your engine, and even a shorter life for your engine. Conversely, using thinner, lighter-weight oil than recommended can cause excessive wear and shorter life.

When should I use 20w50 oil?

20W50 motor oil is suitable for warmer climates, where the higher temperature causes the oil to thin. It is also useful for vehicles subject to hot temperatures and for those used for high-stress activities such as hauling or pulling trailers.

Can I put 10w40 in a 5w30 engine?

The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Is mixing 5w30 with 10w30 bad?

Yes, if topping up. If your oil must be topped up, then you are burning oil already, so the difference won’t cause more damage than is already there. 5W30 and 10W30 are essentially the same at operating temperature.

Is it OK to use 0w20 instead of 5w30?

0w-20 is simply a different viscosity of oil. It won’t be an advantage to your engine if your manufacturer suggests you use 5w-30 and may indeed be a detriment to your engine. 0w-20 may be a recommended oil for certain conditions for your engine and may not be recommended for your engine.

Is 10w 40 too thick?

Multi-grade oils could stay as close to the optimum viscosity over a range of temperatures – not too thick when it is cold and not too thin when it is hot. … The difference between 10W-30 and a 10W-40 is the high temperature viscosity. Obviously, a 10W-40 is thicker than a 10W-30 at high temperature.

What is the best oil for older engines?

When you’re choosing the best oil for older cars or high mileage engines, there are several criteria you can look at.Pennzoil High Mileage Conventional Motor Oil. … Castrol GTX Part-Synthetic High Mileage. … Valvoline MaxLife High Mileage Synthetic Blend. … Mobil1 High Mileage Engine Oil. … Amsoil Premium Protection Motor Oil.More items…•

Is synthetic oil thicker or thinner?

Conventional oils will thicken in cold weather and thin out when very hot, while the viscosity of synthetic is much more uniform. Check your owner’s manual — many newer models require a thinner, lower-viscosity oil, which also helps the engine run more efficiently.

Does oil get thicker as it warms up?

Oil weight, or viscosity, refers to how thick or thin the oil is. … Your engine needs oil that is thin enough for cold starts, and thick enough when the engine is hot. Since oil gets thinner when heated, and thicker when cooled, most of us use what are called multi-grade, or multi-viscosity oils.

Which oil is thicker 20w50 or 10w40?

The smaller number, (the 20 part of 20w-50) describes how the oil behaves at 40 deg C and a 20w at 40 deg C is about 10 times thicker than your engine wants. A 10w-40 is better at around 6 times thicker and a 0w-40 is much better at about 4 times thicker.

Can thick oil damage engine?

#4 – Poor Fuel Economy If you use too thick of a motor oil for the conditions, your fuel mileage will likely suffer. This is because the thicker oil increases resistance on moving parts such as pistons. While your engine will be protected, it will be at the expense of more frequent trips to the gas station.

Is 5w30 oil thicker than 10w30?

10w30 is thicker then 5w30 because it has a higher viscosity in low temperatures. The engine oil will flow slower than 5w30 during the cold season. Thicker or higher viscosity metal oil has a better seal compared to low viscosity oil.

What happens if you put 10w40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Is it okay to mix 5w30 with 10w40?

As posted above, mixing 5w30 with 10w40 will give you an oil that performs somewhat better in the cold than 10w40, but less good cold than 5w30, and that has a viscosity a bit higher than 5w30 but a bit lower than 10w40. … Mixing different oils will not improve the performance or efficiency of the engine in any way.

Which oil is thicker SAE 30 or 40?

SAE 30 is typically called for in lawn mower or similar engines. 40 weight oil is going to be just a little thicker (technically speaking more viscous). … SAE 30/40/50 mono grade oils are of the past and no longer being used now with the advent of multigrade oils and of late synthetic oils.

Should I use thicker oil in an older engine?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well.

Should I use thicker oil in a high mileage engine?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well.

Which oil is thicker 5w30 or 10w40?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.